vericci
Vericci operates across seven key core sectors, delivering specialized technical solutions, trading networks, and creative services.
Electrical
Providing comprehensive, safe, and modern electrical solutions for residential, commercial, and industrial projects. From preliminary design and blueprint creation to final testing and commissioning, we deliver end-to-end power management and installation services engineered to the highest safety standards.
- Design & Planning: Comprehensive electrical layout design and blueprint drafting tailored to architectural specs.
- Infrastructure & Distribution: Cable laying, distribution board (D-Board) setup, and full circuit wiring.
- Terminations & Fixtures: Precision installation of sockets, light switches, control gear, and heavy appliances.
- Smart Circuitry & Automation: Intelligent load control, smart switching, and home/building automation integration.
- Renewable Energy: Solar net-metering and grid-tied system setup for optimal energy efficiency.
- Troubleshooting: Rapid fault location, insulation testing, and circuit rectification.
- Consultation & Project Oversight: Technical guidance, load calculations, and energy efficiency audits
- Testing & Commissioning: Complete verification, safety clearance, and operational handoff for all installations.
- End-to-end service from initial consultation to final commissioning.
- Strict adherence to national electrical safety codes and regulations.
- High-grade materials and precision execution on every project.
Cooling
Delivering complete indoor climate control solutions for residential, commercial, and industrial spaces. From heat-load calculation and duct design to precision installation, emergency repairs, and multi-system commissioning, we keep your environment cool, clean, and energy-efficient year-round.
- Design & Consultation: Load calculations, equipment selection, and custom duct/piping layout planning.
- Installation & Mounting: Precision setup for split units, VRF/VRV systems, ductables, and industrial chillers.
- Piping & Electrical Integration: Refrigerant line runs, drain line routing, dedicated electrical connections, and outdoor bracket setups.
- Smart Climate Controls: Installation of smart thermostats, multi-zone control panels, and automation integration.
- Preventative Maintenance: Chemical wash downs, deep coil cleaning, filter cleaning/replacement, and seasonal overhauls.
- Fault Rectification & Diagnostics: Rapid leak detection, compressor troubleshooting, sensor fixes, and electrical fault repair.
- Refrigerant Servicing: Gas leak detection, pressure testing, vacuuming, and precise refrigerant re-charging.
- Testing & Commissioning: Full airflow balance check, temperature differential logging, and system commissioning before handoff.
- Comprehensive end-to-end service from initial site survey to post-installation maintenance.
- Certified technicians trained in high-efficiency invertor technology and eco-friendly refrigerants.
- Rapid diagnostic turnaround to minimize downtime and restore comfort quickly.
- Focus on energy optimization to reduce utility bills while extending equipment lifespan.
Plumbing
Delivering complete water supply, drainage, and pressure management solutions for residential, commercial, and industrial properties. From system layout and riser architecture to fine trim installations, smart monitoring, and final commissioning, we ensure reliable, leak-free, and energy-efficient plumbing infrastructure.
- Design & Planning: Comprehensive plumbing schematic drafting, riser diagram creation, and pipe sizing.
- Piping Infrastructure: Installation of supply risers, drainage stacks, mainlines, and concealed pipe networks.
- End Trims & Fixture Setup: Precision mounting of sanitaryware, taps, mixers, shower sets, and water-using appliances.
- Smart Water Management: Integration of smart water meters, automated shut-off valves, and consumption monitoring.
- Fault Rectification & Maintenance: Rapid leak detection, blockage clearing, pressure restoration, and pipe repair.
- Consultation & Audits: Technical advisory on water pressure optimization, backflow prevention, and material selection.
- Pressure & Pumping Systems: Installation and calibration of booster pumps, pressure vessels, and variable speed drives.
- Testing & Commissioning: Complete hydro-testing, pneumatic pressure checks, flow balancing, and system handoff.
- End-to-end expertise covering underground layout up to final fixture installation.
- Strict compliance with plumbing standards, backflow prevention, and health codes.
- Modern equipment for non-invasive leak detection and precision pressure tuning.
- Engineered approach focused on long-term durability, water conservation, and zero seepage.
Logistics
Providing complete supply chain management, specialized parts sourcing, and bulk supply solutions for commercial, industrial, and maritime operations. From locating rare machinery components to managing large-scale procurement and doorstep logistics, we deliver reliable, cost-effective end-to-end supply chain support.
- Specialized Parts Procurement: Global sourcing and import of hard-to-find vehicle, engine, heavy equipment, and machinery spare parts.
- Blanket Supply Contracts: Long-term agreements for scheduled, recurring product supply and guaranteed delivery timelines.
- Bulk Purchase Management: Volume purchasing power, manufacturer direct sourcing, and wholesale price negotiation.
- Global Sourcing & Freight: Vendor qualification, international trade logistics, sea/air freight clearance, and import management.
- End-to-End Delivery: Secure warehousing, inventory management, customs clearing, and final site delivery.
- Consultation & Trade Audits: Supply chain risk assessment, alternative part cross-referencing, and procurement cost optimization.
- Quality Assurance & Verification: Pre-shipment inspection, component authenticity checks, and compliance verification.
- Dedicated sourcing network capable of locating obsolete or scarce industrial and automotive components worldwide.
- Streamlined blanket contracts that protect your business against supply chain delays and price volatility.
- Strict quality verification to ensure every imported part meets manufacturer specs and operational requirements.
- Transparent logistics tracking and dependable site delivery, keeping your equipment running with minimal downtime.
Automobile
Delivering complete green mobility, intelligent fleet tracking, EV charging infrastructure, and advanced automotive maintenance services. From individual green vehicle servicing to enterprise fleet telematics and depot charging installation, we provide end-to-end solutions designed to optimize operational efficiency and lower total cost of ownership.
- EV Charging Infrastructure: Supply, installation, and commissioning of AC/DC fast chargers, smart load management, and depot grid integration.
- Fleet Telematics & Analytics: Real-time GPS tracking, battery state-of-health (SoH) monitoring, driver behavior analysis, and automated route optimization.
- Green Vehicle & EV Servicing: Specialist diagnostics, high-voltage battery health checks, regenerative braking service, and preventative maintenance for electric and hybrid vehicles.
- Automobile & Mechanical Maintenance: Full-service diagnostic troubleshooting, engine/drivetrain repairs, fluid management, and routine safety inspections.
- Smart Charging & Energy Management: Automated off-peak charging schedules, load balancing, and solar-integrated green charging systems.
- Consultation & Fleet Electrification: Transition planning, total cost of ownership (TCO) analysis, sustainability audits, and custom hardware/software setup.
- Testing, Calibration & Commissioning: Complete safety compliance verification, telemetry sensor calibration, and system commissioning before deployment.
- Comprehensive capability covering physical vehicle mechanics, high-voltage EV tech, and digital telematics.
- Data-driven fleet analytics that maximize vehicle uptime and reduce energy/fuel overheads.
- Certified technicians trained in modern electric vehicle safety protocols and smart charging systems.
- Tailored solutions for single commercial vehicles, public transit, or large corporate fleets.
Art & Music
Delivering creative, technical, and structural solutions for custom artistic creations, acoustic environments, and sound engineering. From bespoke visual craftsmanship and custom instrument fabrication to studio acoustic planning, sound installation, and performance audio tuning, we combine artistic design with precise technical execution.
- Custom Art & Architectural Craftsmanship: Bespoke wood, metal, and mixed-media artistic installations, custom furniture design, and decorative structural elements.
- Instrument Building & Repair: Custom acoustic/electric guitar construction, structural wood selection, hardware setup, pickup installation, and precision repairs.
- Studio Design & Acoustic Treatment: Spatial acoustic planning, sound isolation, bass trap and diffuser placement, and custom studio furniture fabrication.
- Audio Hardware & Signal Chain Setup: Installation and wiring of preamps, equalizers, audio interfaces, multi-channel mixers, and synthesizer units.
- Live Sound & Venue Systems: Layout, mounting, and wiring for venue sound systems, stage monitors, microphones, and dynamic audio processing equipment.
- Sound Tuning & Commissioning: Frequency response testing, gain staging, line noise rectification, and final acoustic balancing for optimal performance.
- Consultation & Project Planning: Acoustic audits, custom design blueprints, material selection, and creative direction for bespoke artistic projects.
- Rare fusion of fine wood/materials craftsmanship and advanced audio/electronic engineering.
- Custom-tailored approach with zero reliance on cookie-cutter templates or mass-produced solutions.
- Deep technical focus on signal purity, acoustic accuracy, and structural longevity.
- End-to-end execution from initial concept sketches and schematics to fine hand-finishing and final acoustic/sound calibration.
Interior Design, Modular Kitchens & Fine Carpentry
Designing and delivering complete interior environments — from concept and space planning to modular kitchens, custom millwork, and fine carpentry. We combine architectural clarity, modern CNC precision, and hand craftsmanship to create functional, elegant, and durable spaces for homes, offices, and retail.
- Interior Design & Space Planning: Full concept design, layout planning, lighting schemes, material palettes, and 3D visualization for residential and commercial interiors.
- Modular Kitchens: Custom kitchen design, modular cabinet fabrication, countertop installation, appliance integration, and smart storage solutions.
- Fine Carpentry & Joinery: Custom furniture, staircases, doors, wall paneling, built-in wardrobes, and precision woodwork with premium finishes.
- Fit-Out & Renovation: Complete interior fit-out, partition systems, ceiling works, flooring, and renovation of offices, retail spaces, and homes.
- CNC Precision & Custom Millwork: Computer-numerically-controlled cutting, profiling, and edge banding for repeatable, high-precision millwork components.
- Material Sourcing & Finishing: Premium timber, veneers, laminates, and hardware sourcing with spray/laquer finishing and quality inspection.
- Consultation & Project Management: Budgeting, scheduling, on-site supervision, and turnkey delivery from first sketch to handover.
- Seamless integration of architecture, interior design, and handcrafted woodworking.
- End-to-end delivery: concept design, millwork production, installation, and finishing.
- Precision-driven production with modern CNC technology alongside fine hand craftsmanship.
- Custom-tailored solutions for private residences, commercial fit-outs, and hospitality projects.
Vericci Projects
Ongoing and completed work across all seven sectors.
Our Team
The people leading Vericci Enterprise across every sector.
Our Products
Industrial and professional equipment, ready to order.